Last Updated on July 13, 2022 by azamqasim92
Performing Netgear extender setup means bidding adieu to dead zones and accessing a seamless internet connection. Users can access the mywifiext page and make their devices high-performing. But, the problem arises when they face the mywifiext not working issue. Being a technical device, it is common for Netgear extenders to fall victim to such issues.
If you are also struggling with the same issue with your Netgear range extender, then we’ve got you covered. In this article, we will provide you with a list of troubleshooting tactics to get the issue fixed within a flash. Continue reading.
Fixed: Mywifiext Not Working Issue
Reboot Your Netgear Extender
First of all, give a shot to the most simple and convenient troubleshooting hack i.e. rebooting the Netgear extender. It will help your Netgear wireless extender to overcome technical glitches. If you are a newbie and don’t know the process to reboot your extender, give a read to the following instructions:
- Unplug your Netgear range extender from the electrical socket.
- Wait for some time and let your WiFi device rest.
- Now, plug your extender back into the power socket and turn it on.
Once done, try to access the mywifiext page once again and check if the issue is still bothering you. If it is, then don’t delay in executing the next troubleshooting method.
Check the Internet Connection
A poor internet connection can also give you a hard time in accessing mywifiext. Therefore, check if your Netgear range extender and router are connected properly or not. If you have connected your WiFi devices using a wireless connection, then it is time to replace it with a wired one. Also, make sure that the Ethernet cable being used to connect your WiFi devices is damage-free.
Note: An internet connection issue might also occur because of your Internet Service Provider. Thus, it won’t be a bad decision to contact your ISP and ask him to fix the issue if he’s the one at fault.
Update the Web Browser
Are you using an updated web browser to access mywifiext? Probably not. To get the issue fixed at hand, update the web browser right away!
But, updating the web browser is not sufficient. You also have to clear the cookies, cache, and browsing history of the web browser. Once done, try accessing mywifiext again and see if you get success this time.
Check the Web Address
Many users face the mywifiext not working issue because of an incorrect web address. Perhaps, you might have joined the queue. In order to get the issue resolved, use the correct web address. Cross-check the web address before pressing the Enter key.
Note: Do not use the search bar of the web browser to type the extender’s default web address, use the URL bar instead.
Relocate Your Extender
Chances are that the WiFi signals of your extender are being deflected due to the presence of WiFi-interference devices. Therefore, relocate your extender and remember to keep it away from tracking devices, objects with metal layering, radio-waves emitting devices.
Also, water is capable of absorbing the extender’s WiFi signals. So, do not place your WiFi device near objects carrying a large amount of water. Besides, avoid placing the extender near corners or thick concrete walls.
Disable Excess Security
Despite the fact that antivirus software and firewalls help in keeping cyberattacks at bay, they can halt access to mywifiext. So, temporarily disable antivirus software and firewall on your computer before accessing mywifiext.
Reconfigure Your Extender
Lastly, you might also struggle with the mywifiext not working issue due to the improper configuration of your Netgear range extender. In that scenario, you need to perform Netgear extender setup again. But before you do that, consider restoring your extender to the factory default settings. It will wipe out the customized settings from your WiFi device.
To restore your Netgear range extender to the factory default settings, you need to press the Reset button. Thereafter, start looking for the Reset button on your extender. Once found, press it with the help of a pin-like object. Your Netgear extender will get restored to the default mode. Now, configure it again by accessing the Netgear Genie setup wizard. This time you will definitely get success in fixing the issue.
Summing Up
Facing the mywifiext not working issue is common, but with the help of some of the workarounds mentioned above, you will be able to get rid of it.
