If you are the owner of a TP Link wireless repeater, you might be well aware of how important updating its firmware via http://tplinkrepeater.net is. However, if you are unable to do so, then, unfortunately, you are in trouble. But, despite the graveness of the situation, we suggest you relax because we are here to assist you. In this post, we have summed up some troubleshooting hacks that will surely help you get rid of the TP Link firmware update failure issue. Thus, stick to reading.
Fixed: TP Link Firmware Update Failed
Reboot Your TP Link Repeater
Technical glitches are one of the major reasons known to hinder the performance of technical devices. Chances are that they might be stopping you from updating your device too. To get rid of these glitches, you need to reboot your tplinkrepeater. Here’s how:
- Disconnect your client devices from the network of your repeater.
- Turn off your TP Link repeater and unplug it from the wall socket.
- Wait for some time.
- Thereafter, plug your TP Link repeater back into the wall socket and turn it on.
- Do reconnect your client devices to the repeater’s network.
Once you are done rebooting your TP Link repeater, check whether you are able to update its firmware or not. If not, take the help of the next troubleshooting hack.
Verify the Ethernet Connection
Did you use a damaged Ethernet cable to connect your TP repeater and the WiFi router? Well, that is exactly where you went wrong.
To rectify your mistake, you can either replace the Ethernet cable you are currently using with a new one or connect your devices using a wireless source.
Bring Your WiFi Devices Closer
Apart from ensuring a strong connection between your TP repeater and router, also make sure that the distance between them is not too much.
In case it is, it is recommended that you unplug your repeater from its wall socket and plug it into the one located near your home router.
Keep WiFi Interference at Bay
Another thing that you can do to troubleshoot the tplinkrepeaterfirmware update failure issue is to get rid of WiFi-interference devices.
In other words, keep your wireless device away from cordless phones, washing machines, baby monitors, Bluetooth speakers, mirrors, fish tanks, treadmills, televisions, refrigerators, microwave ovens, aluminum studs, etc.
Once you are done following these troubleshooting hacks, try to perform TP firmware update by following the instructions mentioned below.
How to Perform TP Link Firmware Update?
- Download the latest firmware version for your TP Link wireless repeater.
- Extract the firmware file.
- Access the tplinkrepeater.net page. If you come across the tplinkrepeaternotworking issue while doing so, consider using the default IP address to access the tplinkrepeater.net login page.
- When prompted, input the default admin password and username. If you are not certain regarding the default admin details, it is recommended that you refer to the user manual.
- Click Log In.
- You will be taken to the Quick Setup wizard.
- Head over to the System Tools option.
- Select Firmware Update.
- Click the Browse button in order to locate the saved file.
- Once found, select it.
In some time, the firmware of your TP Link repeater will get updated to the latest version.
Read More: How to Log in to TP Link Extender using Tplinkrepeater.net?
Note: Do not perform any background activities on your WiFi-enabled device while the firmware is getting updated. Or else, the TP Link firmware upgrade process will get disrupted.
Need More Help?
Although after following the troubleshooting hacks mentioned in this post, you will be able to fix the TP firmware update failure issue, if you are not able to, reset you device and perform TP Link extender setup from scratch.
